POOL LEAK DETECTION DENTON

At  Mr.Leak Detector, we stand by our ability to find and fix your pool leak. Many of our customers notice their pool losing a specific amount of water over a set period, such as, “I’m losing two inches of water every three days.” Based on this, we guarantee to locate your leak or you don’t pay—provided the following conditions are met:

1. Your pool is losing more than ½ inch of water per day.

2. Your pool heater is not in use.

3. Waterfalls or water features (besides a standard spa spillover) are not running.

4. All recommended repairs have been completed.

If we’ve conducted a complete leak detection for your pool, and it continues to lose water despite meeting the criteria above, please let us know! We’ll void your unpaid invoice or provide a full refund. However, we kindly request a reasonable opportunity to recheck our work to ensure accuracy.

If you think your pool may have a leak, it’s crucial to identify the issue early to prevent further water loss and potential damage. Pools naturally lose water due to evaporation and use, but if the water level drops more than usual, it’s time to investigate. A simple and effective way to confirm if your pool is leaking is by performing the bucket test.

Measuring the Water Level

Start by closely monitoring your pool’s water level over a few days. Mark the waterline on the pool wall with tape or a waterproof marker, and check if it drops significantly overnight or between uses. Remember that factors like weather, wind, and high temperatures can accelerate evaporation, so it’s essential to rule this out before assuming there’s a leak.

The Bucket Test

The bucket test is a straightforward method to determine whether water loss is due to a leak or natural evaporation. Here’s how to do it:

1. Fill a large bucket with pool water to about two-thirds full.

2. Place the bucket on a pool step or ledge, ensuring it’s partially submerged so the water temperature matches that of the pool.

3. Mark the water levels inside the bucket and on the outside (at the pool’s waterline).

4. Leave the setup undisturbed for 24-48 hours, ensuring the pump is off and no one uses the pool.

5. Compare the water loss in the pool to the water loss in the bucket.

If the pool loses more water than the bucket, it’s a strong indicator of a leak. If both levels drop equally, evaporation is likely the cause.

By conducting this test, you can save time and money by confirming whether you need professional leak detection services. If the results point to a leak, don’t delay in addressing the issue. Prompt action can help prevent further water loss, property damage, and expensive repairs.

Ink or Dye Test by Mr. Leak Detector

The ink or dye test is a simple method to help pinpoint the source of a swimming pool leak, such as a crack in concrete or a tear in vinyl. However, it works best if you already have a general idea of where the leak is located. Additionally, this test is only effective for leaks in the pool structure, not in the plumbing system.

How to Perform the Test:

1. Gather Supplies: Use food coloring or another non-toxic dye. Choose a color that stands out in the water, like red.

2. Target the Suspected Area: Move toward the area where you think the leak might be.

3. Release the Dye: Squirt a small amount of dye into the water near the suspected leak.

4. Watch the Movement: If there’s a crack or tear, the dye will quickly flow toward it, revealing the source of the leak.

Drainage Test as an Alternative

Another method to identify a pool leak is to let the pool drain naturally. If there’s a leak in the pool wall, the water level will stop dropping once it reaches the level of the crack or tear.

Drawback of the Drainage Test:

If the leak is near the bottom of the pool or on the floor, you may need to empty the pool almost entirely to locate the issue.

For precise leak detection and professional repairs, trust the expertise of Mr. Leak Detector!